SS 1.4401 / UNS S31600 Sheets & Plates

Stainless steel products
Stack of thick stainless steel plates on a workbench with a tape measure and caliper

SS 1.4401 / UNS S31600 Sheets & Plates

SS 1.4401 (UNS S31600), widely known as grade 316, is an austenitic stainless steel with 16–18% chromium, 10–14% nickel and 2–3% molybdenum. The molybdenum lifts its resistance to pitting and crevice corrosion in chloride and acidic conditions, making it a standard choice for marine, chemical and hygienic service.

It welds readily by TIG and MIG, forms well, stays tough at low temperatures and keeps its strength when hot. The smooth, non-porous surface is easy to clean, and its bright finish suits architectural work as well as process plant.

Grade
1.4401 / UNS S31600
Sheet thickness
0.25–6.0 mm
Plate thickness
4.0–100 mm
Width
600–2000 mm

Specifications

Grade & sizes

Material grade
SS 1.4401 / UNS S31600 (AISI 316)
Standard
ASTM A240 / ASME SA240
Sheet thickness
0.25–6.0 mm
Plate thickness
4.0–100 mm
Width
600–2000 mm
Length
1000–10000 mm

Chemical composition (%)

ElementUNS S31600
Carbon (C)0.08 max
Manganese (Mn)2.00 max
Silicon (Si)0.75 max
Phosphorus (P)0.045 max
Sulphur (S)0.030 max
Chromium (Cr)16.0–18.0
Nickel (Ni)10.0–14.0
Molybdenum (Mo)2.00–3.00
Nitrogen (N)0.10 max

Mechanical properties

Tensile strength
515 MPa min
Yield strength (0.2% proof)
205 MPa min
Elongation
40% min
Hardness
217 HBW / 95 HRB max

Advantages

PropertyDetail
Corrosion resistanceMolybdenum gives strong resistance to chlorides, acids and other aggressive media
StrengthHigh tensile strength; keeps its toughness at low temperatures
WeldabilityWelds by conventional TIG and MIG methods for complex parts and structures
Heat resistanceHolds its mechanical properties at elevated temperatures
HygieneSmooth, non-porous surface that is quick to clean
AppearanceBright, polished look for architectural and decorative use

Applications

IndustryTypical use
Chemical processingReactors, heat exchangers and storage tanks
Marine & offshoreBoat fittings, pipelines and parts exposed to seawater
Food & pharmaceuticalMixers, conveyors, tanks and process vessels
Pulp & paperDigesters, evaporators and pulp washers
MedicalSurgical instruments and hospital equipment
Architecture & constructionFaçades, handrails and structural supports
High-temperature plantHeat exchangers, boilers and furnace parts

Supply options

Condition
Hard, half hard, quarter hard, spring hard
Finishes
HR (hot rolled plate), CR (cold rolled sheet), 2B, 2D, BA, No.4, No.8, satin
Protection
Plastic (PVC) film coating on request

Notes

  • Chemical composition and mechanical properties are the limits set by ASTM A240 for UNS S31600.