SS 1.4306 / UNS S30403 Sheets & Plates

Stainless steel products
Stack of stainless steel sheets on a pallet with protective film peeled back

SS 1.4306 / UNS S30403 Sheets & Plates

SS 1.4306 (UNS S30403) is the low-carbon version of grade 1.4301 / S30400, better known as 304L. Its reduced carbon content limits carbide precipitation during welding, so welded joints keep their corrosion resistance and stay stable over a long service life.

Supplied as sheets and plates in 2B, BA, No.4, matte and polished finishes for food processing, chemical, marine and architectural work, where weldability, formability and durability all count.

Grade
1.4306 / UNS S30403
Thickness
0.5–100 mm
Width
1000–2000 mm
Length
2000–6000 mm

Specifications

Grade & sizes

Material grade
SS 1.4306 / UNS S30403 (AISI 304L)
Standard
ASTM A240 / ASME SA240
Thickness
0.5–100 mm
Width
1000–2000 mm
Length
2000–6000 mm
Surface finish
2B, BA, No.4, matte, polished

Chemical composition (%)

ElementUNS S30403
Carbon (C)0.030 max
Manganese (Mn)2.00 max
Silicon (Si)0.75 max
Phosphorus (P)0.045 max
Sulphur (S)0.030 max
Chromium (Cr)17.5–19.5
Nickel (Ni)8.0–12.0
Nitrogen (N)0.10 max

Mechanical properties

Tensile strength
485 MPa min
Yield strength (0.2% proof)
170 MPa min
Elongation
40% min
Hardness
201 HBW / 92 HRB max

Key characteristics

PropertyDetail
Low carbon0.030% max, so carbides do not form along grain boundaries during welding
WeldabilityExcellent; suits welded structures and fabricated vessels
Corrosion resistanceGood resistance to general and intergranular corrosion
Strength & toughnessReliable strength and toughness for long-term performance
FormabilityBends, draws and fabricates easily

Applications

IndustryTypical use
Food processingEquipment parts that must resist corrosion and clean easily
Chemical processingTanks, piping and equipment in contact with corrosive chemicals
MarineParts exposed to seawater and harsh weather
ArchitectureFaçades, railings and decorative work
Heat exchangersPlates and shells for high-temperature service

Supply options

Condition
Hard, half hard, quarter hard, spring hard
Finishes
HR (hot rolled plate), CR (cold rolled sheet), 2B, 2D, BA, No.4, No.8, satin
Protection
Plastic (PVC) film coating on request

Notes

  • Chemical composition and mechanical properties are the limits set by ASTM A240 for UNS S30403.